NCS Products - Discover the ZEN of Time Lapse Revolution TimeFlow Home

Home > Revolution Motor > Revolution Bolex > Bolex Shafts

 

Revolution Sync Single-Frame Timelapse Motor - Bolex Drive Shafts

All Bolex cameras have an 8:1 drive shaft. That means that one turn of the shaft exposes 8 frames of film. The later ones have a 1:1 shaft in addition to the 8:1 shaft.

On earlier Bolexes (for example, Rex1 as well as early non-reflex models), the center pin on the 8:1 drive shaft is 3mm in diameter. Later Bolexes have a larger 4mm center pin.

You will be asked the center pin size of your camera when you order the motor.

A 3mm coupler will not fit on a Bolex with a 4mm drive shaft. A 4mm coupler will fit on the smaller 3mm drive shaft, but it will wiggle and bind and not work properly.

 

Bolex Rex 1, with 3mm drive shaft.

 

Bolex Sync Motor 4mm shaft

Later Bolex, with 4mm drive shaft. This happens to be a Bolex M.

 

Bolex Sync Motor Drive Shafts

Latest Bolex. Has 8:1 drive shaft and 1:1 drive shaft (the 8:1 shaft is 4mm). The later Reflex cameras are like this, as well as the Bolex S.

 

Bolex EBM

Bolex EBM - They have 4mm shaft. Yes it will work on the EBM.
I don't think it will work on the EL, although I haven't checked

 

Antique Bolex. No frame counter. The Revolution motor cannot drive this.

Revolution Bolex main page

 

Traffic

______________
OUR PRODUCTS

TimeFlow
Intervalometers
> for Bolex
> for Beaulieu
> for K-3
> for Scoopic


Revolution Motors
Time Lapse + Sync
> for Arri
> for Bolex
> for Eyemo
> for Mitchell
> for Other

 

______________

Prices+Ordering

Reviews

Mailing List

Film Time Lapse
Digital Time Lapse

 

_______________
OTHER NCS
WEBSITES
> Arri
> Bolex
> Eyemo/Filmo
> Film Resources
> Krasnogorsk-3

 


Home | | Prices+Ordering ]
TimeFlow Intervalometer | Revolution | The Krasnogorsk-3 | Resources | Time Lapse! 

Contents © 2024 NCS Products | | New York, USA